Ryvyr GV105RSQ Manuel d'utilisateur télécharger pdf

SUGGESTED TOOLS AND MATERIALS

ABOVE COUNTER INSTALLATION

INSTALLATION INSTRUCTIONS

SEGMENT

VESSEL SINK

GV105RRD | GV105RSQ

09.2014

For customer support please visit www.ryvyr.com or call 866.395.8112 weekdays 8:00 to 5:00 EST or fax 866.395.8113 any time

• Never use a strong / abrasive cleaner. Always test your cleaning solution on an unnoticeable area before applying it to the

entire surface.

• Wipe surfaces clean, immediately after applying cleaner.

• Do not allow the cleaner to sit or soak. Never let cleaners sit on the surface of the lavatory.

•

Use a soft, dampened sponge or cloth. Never use an abrasive material such as a brush or scouring pad to clean surfaces.

They will scratch the lavatory surface.

• Always rinse and wipe clean the fixtures to prevent soap buildup.

CARE AND CLEANING

Adjustable Wrench Channel Lock Tape Measure Safety Glasses

10'

STEP 1:

Cut out a 1 3/4” hole on the counter-top for the drain. Please refer to the cutout template.

STEP 2:

Carefully, position the sink in the cutout opening. If you have mounting ring, place the mounting ring on the counter-top before

positioning the sink.

STEP 3:

Use moderate force and hand-tighten the drain kit to the sink to secure it on the counter-top. It may be necessary to cut part of the

tail-piece or part of the horizontal leg in order to make fit to existing plumbing.

CAUTION! Do not over tighten the drain assembly as this may cause the bowl to forcefully crack during installation or at some

time in the future.

YOUR GLASS VESSEL SINK

BEFORE YOU BEGIN

All vessel sinks do not have an overflow and may require a specific type of drain such as a pop-up, twist and turn, or a grid drain

assembly. Please check your local plumbing codes to determine which drain will meet local plumbing code standards for this product.

• Observe all plumbing and building codes..

• Follow these instructions only if it apply to your installation. Vessel sinks allow you to be creative and flexible with your installation.

• Before installation, remove your new glass sink and carefully inspect it for damage. Return the glass sink to its packaging until you

are ready to install it.

• These instructions contain important care and cleaning instructions. Please review these instructions carefully.

1 2

Résumé du contenu

Page 1 - INSTALLATION INSTRUCTIONS

SUGGESTED TOOLS AND MATERIALSABOVE COUNTER INSTALLATIONINSTALLATION INSTRUCTIONSSEGMENTVESSEL SINKGV105RRD | GV105RSQ09.2014For customer support pleas

Page 2 - TEMPERED GLASS

Commentaires sur ces manuels

Pas de commentaire

Ryvyr GV105RSQ Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la maison Ryvyr GV105RSQ. Ryvyr GV105RSQ User Manual [en] [de] [es] [it] Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la maison Ryvyr GV105RSQ